Kia Niro: Headrest / Removal and installation
To remove the headrest, raise it as far as it can go then press the release button (1) while pulling the headrest up (2).
To reinstall the headrest, put the headrest poles (3) into the holes while pressing the release button (1). Then adjust it to the appropriate height.
WARNING
Make sure the headrest locks in position after adjusting it to properly protect the occupants.
Adjusting the height up and down
To raise the headrest, pull it up to the desired position (1). To lower the headrest,
push and hold the release button (2) on the headrest support and lower the headrest
to the desired position ...
Seat belts
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Rear Combination Lamp Repair procedures
Removal
Rear Combination Lamp
(Outside)
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the rear combination lamp cover
(A).
3.
Remove the rear combination lamp ( ...
Kia Niro 2017 (DE HEV) Service Manual: Hybrid Control Unit (HCU) Schematic diagrams
HCU Terminal And Input/Output
Signal
Terminal Function
Connector [C133-S]
Pin No.
Description
Connected to
1
HCU ground
Chassis ground
2
HCU ground
...
