Fuel tank capacity: approximately 44 litres (Petrol) or 41 litres (Diesel).
Reserve level: approximately 5 litres.
Low fuel level
When the low fuel level is
reached, this warning lamp comes on on the instrument panel, accompanied by an
onscreen message and an audible signal. When it first comes on, about 5
litres of fuel remain.
Until sufficient fuel is added, this warning lamp appears every time the ignition is switched on, accompanied by an onscreen message and an audible signal. When driving, this message and audible signal are repeated with increasing frequency as the fuel level drops towards 0.
You must refuel as soon as possible to avoid running out of fuel.
For more information on Running out of fuel (Diesel), refer to the corresponding section.
Stop &
Start
Never refuel with the engine in STOP mode; you must switch off the ignition.
Refuelling
When refuelling, at least 5 litres must be added in order to be registered by the fuel gauge.
Opening the filler cap may create a noise caused by an inrush of air. This vacuum is entirely normal, resulting from the sealing of the fuel system.
To refuel in complete safety:
Do not continue after the nozzle’s third cut-out. Doing so may cause malfunctions.
If
you have put in the wrong fuel for the vehicle, you must have the fuel tank
drained and filled with the correct fuel before starting the engine.
The vehicle is fitted with a catalytic converter, which helps to reduce the level of harmful emissions in the exhaust gases.
For petrol engines, you must use unleaded fuel.
The filler neck is narrower, admitting unleaded petrol nozzles only.
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Inspection
AEB function ON / OFF switch was included to USM (User Setting Menu) and the
state of the factory is ON.
When the IGN On, maintain ON condition by default. And does not reflect the driver
settings when next IGN On.
If turned the ESP function Off, the AEB function is t ...
Peugeot 2008 2019-2023 Owner's Manual: Under-inflation detection
This system automatically checks the pressures of the tyres while driving.
It compares the information given by the wheel speed sensors with
reference values, which must be reinitialised every time the tyre pressures are
adjusted or a wheel changed.
The system triggers an alert as soon as it detec ...