Kia Niro: Floor Console / Rear Console Cover Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Floor Console / Rear Console Cover Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Be careful not to bend or scratch the trim and panels.

1.	Remove the floor console assembly. (Refer to Floor Console - "Floor Console Assembly")

2.	Loosen the screws.

3.	Remove the rear console cover (A) by using a remover.

Install in the reverse order of removal.

•	Make sure the connector is connected properly.

•	Replace any damaged clips.

Rear Console Cover Components and components location

Component Location 1. Rear console cover ...

Console Armrest Components and components location

Component Location 1. Console armrest ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Reservoir Components and components location
Components 1. Clutch disc 2. Clutch cover 3. Concentric slave cylinder 4. Hybrid motor assembly 5. Engine clutch actuator 6. Reservoir ...

Kia Niro 2017 (DE HEV) Service Manual: General information
Initial Response: Identify, Immobilize and Disable The following procedures should be used whenever you are dealing with a Niro at an emergency scene. All other operations should be consistent with your department’s standard operating procedures or guides. Hybrid is damaged by a crash may h ...