Kia Niro: Engine Control System / Rail Pressure Sensor (RPS) Specifications

Specification
Pressure
Output Voltage (V) [Vref=5V]
bar
[MPa (kgf/cm², psi)]
0
0 (0, 0)
0.5
140
14 (142, 2031)
2.5
280
28 (286, 4061)
4.5

Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the HO2S connector. 3. Measure resistance between the H ...

Rail Pressure Sensor (RPS) Description and operation
Description Installed on the delivery pipe, the Rail Pressure Sensor (RPS) measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) b ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Front Seat Shield Inner Cover Repair procedures
Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pie ...

Kia Niro 2017 (DE HEV) Service Manual: Purge Control Solenoid Valve (PCSV) Description and operation
Description Installed on the intake manifold, the Purge Control Solenoid Valve (PCSV) controls the evaporative purge between the canister and the intake manifold. It is a solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fu ...

© 2016-2024 www.kniro.net