Kia Niro: Engine Control System / Rail Pressure Sensor (RPS) Schematic diagrams
| Circuit Diagram |
Harness Connector
Rail Pressure Sensor (RPS) Description and operation
Description
Installed on the delivery pipe, the Rail Pressure Sensor (RPS) measures the instantaneous
fuel pressure in the delivery pipe. The sensing element (Semiconductor element)
b ...
Rail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the KDS/GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS during idle at various engine speeds. ...
Other information:
Peugeot 2008 2019-2023 Owner's Manual: Hill start assist
This system keeps your vehicle briefly stationary (for approximately 2
seconds) when making a hill start, while you transfer your foot from the brake
pedal to the accelerator pedal.
This system is only active when:
the vehicle is completely stationary, with your foot on the brake pedal,
c ...
Kia Niro 2017 (DE HEV) Service Manual: Fuel Pressure Sensor (FPS) Repair procedures
Inspection
1.
Connect the KDS/GDS on the Data Link Connector (DLC).
2.
Check that the output voltage is within the specification.
Pressure [kPa (kgf/cm², psi)]
Output Voltage (V) [Verf=5V]
...
