Kia Niro: Front Bumper / Radiator Grille Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the front bumper cover.

(Refer to Front Bumper - "Front Bumper Cover")

2.

Remove the front bumper wiring.

3.

Remove the front bumper energy absorber (A).

4.

Loosen the mounting screws and remove the radiator grille upper cover (A).

5.

Remove the front bumper radiator grille (A) after loosening the screws.

6.

Install in the reverse order of removal.

  

Make sure the connector is connected properly.

Replace any damaged clips.

Radiator Grille Components and components location
Component Location 1. Radiator Grille ...

Front Door
...

Other information:

Kia Niro (DE HEV) Owners Manual: Driver's Attention
The driver must be cautious in the below situations, because the system may not detect other vehicles or objects in certain circumstances. - The vehicle drives on a curved road or through a tollgate. - The sensor is polluted with rain, snow, mud, etc. - The rear bumper, in which the sensor is l ...

Kia Niro 2017 (DE HEV) Service Manual: Oil Pump Components and components location
Components 1. Timing chain cover 2. Outer rotor 3. inner rotor 4. Oil pump cover 5. O-ring 6. Relief plunger 7. Relief spring 8. Relief plug ...

© 2016-2026 www.kniro.net