Kia Niro: System setting and activation / Prerequisite for activation
The AEB gets ready to be activated, when the AEB is selected on the LCD display, and when the following prerequisites are satisfied.
- The ESC is activated.
- The driving speed is over 10km/h. (However, AEB is activated within certain driving
speed.)
- When recognizing the vehicle or the pedestrian in front. (However, AEB does not
activate according to conditions in front and vehicle systems, but it notices only
certain warnings.)
WARNING
- The AEB automatically activates upon placing the ignition switch to the ON position. The driver can deactivate the AEB by canceling the system setting on the LCD display.
- The AEB automatically deactivates upon canceling the ESC. When the ESC is canceled, the AEB cannot be activated on the LCD display.
- Set or cancel AEB with controlling switches on steering wheel after stopping the vehicle in the safe place for your safety.
System setting
The driver can activate the AEB by placing the ignition switch to the ON position
and by selecting 'User Settings', 'Driving Assist', and 'Assist Emergency Braking'.
The AE ...
AEB warning message and system control
The AEB produces warning messages and warning alarms in accordance with the collision
risk levels of followings like vehicle’s sudden braking in front or lack of vehicle
to vehicle distance or c ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: CVVT (Continuous Variable Valve Timing) System Description and operation
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve
timing of the intake and exhaust valve in accordance with the ECM control signal
which is calculated by the engine speed and load.
By controlling CVVT, the valve overlap or underlap occurs, wh ...
Kia Niro 2017 (DE HEV) Service Manual: Sunroof Switch Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Open the sunglass case cover from the overhead console and remove the
2 screws holding the overhead console. Disconnect the switch connector and
Map lamp connector, and then r ...
