Kia Niro: Engine compartment fuse replacement / Multi fuse

If the multi fuse is blown, it must be removed as follows:

1. Disconnect the negative battery cable.

2. Remove the nuts shown in the picture above.

3. Replace the fuse with a new one of the same rating.

4. Reinstall in the reverse order of removal.

✽ NOTICE

If the multi fuse is blown, we recommend that you consult an authorized Kia dealer.

Engine compartment fuse replacement
1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling the cover up. When the blade type fuse is disconnected, remove it by using t ...

Main fuse
If the main fuse is blown, it must be removed as follows: 1. Turn off the engine. 2. Disconnect the negative battery cable. 3. Remove the nuts shown in the picture above. 4. Replace the fuse wit ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Inhibitor Switch Description and operation
Description • The inhibitor switch is installed on top of transmission, and is connected to the shift lever through shift cable. • Inhibitor switch signals (S1, S2, S3, S4) are transmitted to the TCM according to the driver's shif ...

Kia Niro 2017 (DE HEV) Service Manual: Radiator Repair procedures
Removal 1. Disconnect the negative (-) cable of the 12V battery. 2. Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") 3. Drain the coolant of hybrid motor cooling syste ...

© 2016-2024 www.kniro.net