Kia Niro: Integrated Memory System (IMS) / Memory power seat unit Components and components location
| Components |
Connector Pin Information
|
No. |
Connecter A |
Connecter B |
Connecter C |
|
1 |
- |
Battery (+) |
Slide switch signal (Forward) |
|
2 |
Reclining motor (Forward) |
Ground |
Reclining switch signal (Forward) |
|
3 |
Rear height motor (Up) |
Battery (+) |
Front tilt switch signal (Up) |
|
4 |
Slide motor (Forward) |
- |
Rear height switch signal (Up) |
|
5 |
- |
Ground |
- |
|
6 |
Reclining motor (Backward) |
? |
Body-CAN (High) |
|
7 |
Front tilt motor (Up) |
Body-CAN (Low) |
|
|
8 |
Front tilt motor (Down) |
IMS Switch1 |
|
|
9 |
Rear height motor (Down) |
Reclining limit switch (Forward) |
|
|
10 |
Slide motor (Backward) |
Slide sensor |
|
|
11 |
? |
Front tilt sensor |
|
|
12 |
- |
||
|
13 |
Seat position sensor power |
||
|
14 |
IGN1 |
||
|
15 |
Slide switch signal (Backward) |
||
|
16 |
Reclining switch signal (Backward) |
||
|
17 |
Front tilt switch signal (Down) |
||
|
18 |
Rear height switch signal (Down) |
||
|
19 |
- |
||
|
20 |
Ground |
||
|
21 |
SET Switch |
||
|
22 |
IMS Switch2 |
||
|
23 |
Reclining limit switch (Backward) |
||
|
24 |
Reclining sensor |
||
|
25 |
Seat rear height sensor |
||
|
26 |
- |
||
|
27 |
- |
||
|
28 |
Battery (+) |
Description and operation
Description
The optimum seat position set by the driver is memorized in the power seat unit
by IMS switch control to be recalled by using the IMS switch even if the seat position
has ...
Memory power seat unit Schematic diagrams
Circuit Diagram
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: CVVT & Camshaft Description and operation
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve
timing of the intake and exhaust valve in accordance with the ECM control signal
which is calculated by the engine speed and load.
By controlling CVVT, the valve over-lap or under-lap occurs, ...
Kia Niro 2017 (DE HEV) Service Manual: Ignition Coil Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the battery negative (-) terminal.
2.
Remove the engine cover.
3.
Disconnect the ignition coil connector (A).
4.
Remove the ignition ...
