Peugeot 2008: Ease of use and comfort / Manual air conditioning

Peugeot 2008. Manual air conditioning Press the Climate button to display the system controls page.

Peugeot 2008. Manual air conditioning

  1. Temperature adjustment
  2. Air flow adjustment
  3. Air distribution adjustment
  4. Air conditioning on/off

Adjusting the temperature

Air flow adjustment

When the air flow is reduced to a minimum, ventilation stops.

Air distribution adjustment

Peugeot 2008. Manual air conditioning Central and side air vents, footwells

Peugeot 2008. Manual air conditioning Central and side air vents

Peugeot 2008. Manual air conditioning Windscreen

Peugeot 2008. Manual air conditioning Windscreen, footwells

Peugeot 2008. Manual air conditioning Footwells

Air conditioning on / off

The air conditioning system is designed to operate effectively in all seasons, with the windows closed.

It is used to:

 

Peugeot 2008. Manual air conditioning Air conditioning does not operate when the air flow is disabled.

To obtain cool air more quickly, enable interior air recirculation for a brief period. Then return to the intake of exterior air.

Switching off the air conditioning may result in some discomfort (humidity or misting).

Heating and Ventilation
Air intake The air circulating in the passenger compartment is filtered and originates either from the exterior, via the grille located at the base of the windscreen, or from the inside in air recir ...

Automatic air conditioning
This system automatically controls the activation of the air conditioning system, regulating the temperature, air flow and air distribution inside the passenger compartment. The air conditioning ope ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Water Temperature Control Assembly Repair procedures
Removal and Installation Water Temperature Assembly    • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage sys ...

Kia Niro 2017 (DE HEV) Service Manual: AVN Remote Controller Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the steering wheel assembly. (Refer to Steering System - "Steering Wheel") 3. Remove the steering back cover (A) after loosening the mounti ...

© 2016-2023 www.kniro.net