Kia Niro: Instrument cluster / Instrument Cluster Control
Adjusting Instrument Cluster Illumination
WARNING
Never adjust the instrument cluster while driving. This could result in loss of control and lead to an accident that may cause death, serious injury, or property damage.
The brightness of the instrument panel illumination is changed by pressing the illumination control button (“+” or “-”) when the ignition switch or Engine Start/Stop button is ON, or the tail lights are turned on.
- If you hold the illumination control button (“+” or “-”), the brightness will be changed continuously.
- If the brightness reaches to the maximum or minimum level, an alarm will sound.
Instrument cluster
■ Type A
■ Type B
1. Hybrid system gauge
2. Fuel gauge
3. Speedometer
4.Warning and indicator lights
5. LCD window
6. Battery SOC (State of Charge) gauge
7. Distance To Empty ...
LCD window control
■ Type A
■ Type B
The LCD window modes can be changed by using the control buttons on the steering
wheel.
(1) : MODE button for change the LCD
MODES
(2) : MOVE scroll switch for sele ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Muffler Components and components location
Components
1. Front muffler
2. Exhaust heat recovery system (EHRS)
3. Center muffler
4. Rear muffler
5. Gasket
6. Rubber hanger
...
Kia Niro 2017 (DE HEV) Service Manual: Front Door Trim Components and components location
Component Location
1. Front door trim
...
