Kia Niro: Hybrid Motor Assembly / Hybrid Starter Generator(HSG) Specification
Kia Niro 2017 (DE HEV) Service Manual / Hybrid Motor System / Hybrid Motor Assembly / Hybrid Starter Generator(HSG) Specification
| Specification |
|
Item |
Specification |
|
|
Type |
PMSM (Interior Permanent Magnet Synchronous Motor) |
|
|
Max. output |
8.0 kW / 2,160 - 12,000 rpm |
|
|
Max. torque |
35.3 N·m / 0 - 2,160 rpm |
|
|
Cooling system |
Water-cooled |
|
Hybrid Starter Generator(HSG) Components and components location
Components
1. Hybrid starter generator (HSG)
2. HSG bracket
...
Hybrid Starter Generator(HSG) Repair procedures
Inspection
1.
Inspect the line to line resistance using mΩ tester.
Item
Pin
Specification
R ...
Other information:
Kia Niro (DE HEV) Owners Manual: Care of seat belts
Seat belt systems should never be disassembled or modified. In addition, care
should be taken to assure that seat belts and belt hardware are not damaged by seat
hinges, doors or other abuse.
WARNING
When you return the rear seatback to its upright position after the rear seatback
has been f ...
Kia Niro 2017 (DE HEV) Service Manual: Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection
1.
Connect the KDS/GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS during idle with IG ON.
Pressure
[kPa (kgf/cm², psi)]
Output Voltage (V) [Vref = 5V]
...
© 2016-2023 www.kniro.net
