Kia Niro: Hood / Hood Insulator Pad Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Hood / Hood Insulator Pad Repair procedures

Replacement
1.

Using a clip remover, detach the clips, and remove the hood insulator pad (A).

  

Be careful not to damage the hood and body.

2.

Install in the reverse order of removal.

  

Replace any damaged clips.

Hood Assembly Repair procedures
Replacement    Be careful not to damage the hood and body.    ...

Hood Weatherstrip Repair procedures
Replacement 1. Remove the hood weatherstrip (A).    Be careful not to damage ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: In-car Sensor Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Using a remover, remove the crash pad side cover [RH] (A). 3. Loosen the screw and remove the crash pad plate [RH] (A) 4. ...

Kia Niro 2017 (DE HEV) Service Manual: Rear Stabilizer Bar Repair procedures
Removal 1. Disconnect the battery negative cable. 2. Remove the wheel and tire. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) ...

© 2016-2024 www.kniro.net