Peugeot 2008: Driving / Hill start assist

This system keeps your vehicle briefly stationary (for approximately 2  seconds) when making a hill start, while you transfer your foot from the brake pedal to the accelerator pedal.

This system is only active when:

Peugeot 2008. Hill start assist Do not leave the vehicle while it is being held temporarily by hill start assist.

If someone needs to get out of the vehicle with the engine running, apply the parking brake manually. After that, ensure that the parking brake indicator lamp and the indicator lamp  P in the electric parking brake control lever are on fixed.

Peugeot 2008. Hill start assist The hill start assist function cannot be deactivated. However, use of the parking brake to immobilise the vehicle interrupts its operation.

Operation

Peugeot 2008. Hill start assist

On an ascending slope, with the vehicle stationary, the vehicle is held for a short time when you release the brake pedal:

Peugeot 2008. Hill start assist

On a descending slope, with the vehicle stationary and reverse gear engaged, the vehicle is held for a short time when you release the brake pedal.

Malfunction

Peugeot 2008. Hill start assist These warning lamps come on in the event of a malfunction.

Contact a PEUGEOT dealer or a qualified workshop to have the system checked.

Driving modes
The number and type of driving modes available depend on the vehicle’s engine and equipment. Driving modes are selected using the following control: Pressing the control displays the modes on the ...

Gear efficiency indicator
This system helps reduce fuel consumption by recommending the most appropriate gear. Operation Depending on the driving situation and the vehicle's equipment, the system may advise skipping one or m ...

Other information:

Toyota Corolla 2019-2022 Owners Manual: Installing tire pressure warning valves and transmitters (vehicles with a tire pressure warning system)
When replacing tires or wheels, tire pressure warning valves and transmitters must also be installed. When new tire pressure warning valves and transmitters are installed, new ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialize ...

Kia Niro (DE HEV) Owners Manual: Taking care of leather seats
Vacuum the seat periodically to remove dust and sand on the seat. It will prevent abrasion or damage of the leather and maintain its quality. Wipe the natural leather seat cover often with dry or soft cloth. Sufficient use of a leather protective may prevent abrasion of the cover and he ...

© 2016-2022 www.kniro.net