Kia Niro: Headlamp Leveling System / Headlamp Leveling Switch Repair procedures

Removal
1.

Disconnect the negative (-) battery terminal.

2.

Remove the crash pad lower panel.

(Refer to Body - "Crash Pad Lower Panel")

3.

Remove the crash pad plate [LH] (A) after loosening the screws.

4.

Disconnect the crash pad side switch connector (A).

5.

Remove the crash pad side switch (A) after loosening the screws.

Installation
1.

Install the crash pad side switch.

2.

Connect the crash pad side switch connector.

3.

Install the crash pad plate [LH].

4.

Install the crash pad lower panel.

5.

Connect the negative (-) battery terminal.

Headlamp Leveling Switch Schematic diagrams
Circuit Diagram ...

Horn
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Blower Motor Repair procedures
Inspection 1. Operate the heater controls at IGN2 to ensure that the motor is running. 1. Battery (+) 2. Input signal 3. ? 4. Ground 2. If the blower motor does ...

Peugeot 2008 2019-2022 Owner's Manual: Child seats
The regulations on carrying children are specific to each country. Refer to the legislation in force in your country. For maximum safety, please observe the following recommendations: In accordance with European regulations, all children under the age of 12 or less than 4 ft 11” (150 cm) ta ...

© 2016-2022 www.kniro.net