Kia Niro: Lift And Support Points / General information

Lift And Support Points
  

When heavy rear components such as suspension, fuel tank, spare tire, tailgate and trunk lid are to be removed, place additional weight in the luggage area before hoisting. When substatial weight is removed from the rear of the vehicle, the center of gravity may change and can cause the vehicle to tip forward on the hoist.

  

Since each tire/wheel assembly weights approximately 30lbs (14kg), placing the front wheels in the luggage area can assist with the weight distribution.

Use the same support points to support the vehicle on safety stands.

1.

Place the lift blocks under the support points as shown in the illustration.

2.

Raise the hoist a few inches (centimeters) and rock the vehicle to be sure it is firmly supported.

3.

Raise the hoist to full height to inspect the lift points for secure support.

Lift And Support Points
...

Towing
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Muffler Repair procedures
Removal and Installation Front Muffler 1. Disconnect the heated oxygen sensor connector (A) and then remove it from the bracket. 2. Remove the under cover (A). Tightening torque : 7.8 - 9.8 N·m (0.8 - 1.0 ...

Kia Niro 2017 (DE HEV) Service Manual: Seat Heater Switch Repair procedures
Removal [Front Seat] 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console assembly. (Refer to Body - "Floor Console Assembly") 3. Disconnect the front seat heater switch connector ( ...

© 2016-2026 www.kniro.net