Kia Niro: Crankcase Emission Control System / Fuel Tank Air Filter Repair procedures

Removal
1.

Turn ignition switch OFF and disconnect the negative (-) battery terminal.

2.

Remove the filler-neck assembly.

(Refer to Engine Control / Fuel System - "Filler-Neck Assembly")

3.

Disconnect the ventilation hoses(A).

4.

Remove the fuel tank air filter (C) after loosening the mounting bolts (B).

Installation
1.

Install in the reverse order of removal.

Fuel Filler Cap Description and operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler ...

Exhaust Emission Control System
...

Other information:

Kia Niro (DE HEV) Owners Manual: Technical Data (18 inch tire)
System voltage: DC 12 V Working voltage: DC 10 - 15 V Amperage rating: MAX. 15A ± 1A (at DC 12V operation) Suitable for use at temperatures: -30 ~ +70°C (-22 ~ +158°F) Max. working pressure: 6 bar (87 psi) Size Compressor: 168 x 150 x 68 mm (6.6 x 5.9 x 2.7 in.) Sealant bottle: 104 x 85 ø ...

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Teaching Procedures 1. Key Teaching Procedure Key teaching must be done after replacing a defective PCM(ECM) or when providing additional keys to the vehicle owner. The procedure starts with an PCM(ECM) request for vehicle specific data (PIN code: 6dig ...

© 2016-2023 www.kniro.net