Inspection |
1. |
Switch "OFF" the ignition and disconnect the negative (-) battery terminal. |
2. |
Disconnect the fuel pressure regulator valve connector. |
3. |
Measure resistance between the fuel pressure regulator valve terminals 1 and 2. |
4. |
Check that the resistance is within the specification.
|
Kia Niro 2017 (DE HEV) Service Manual: Pre-Charge Resistor Repair procedures
Removal
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure to follow the safety instr ...
Kia Niro (DE HEV) Owners Manual: Lap belt
To fasten your seat belt:
To fasten a 2-point static type belt, insert the metal tab (1) into the locking
buckle (2). There will be an audible "click" when the tab locks into the buckle.
Check to make sure the belt is properly locked and that the belt is not twisted.
With a 2-p ...