Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") |
3. |
Remove the crash pad lower switch (A) after loosening the mounting screws.
|
Installation |
1. |
Install the crash pad lower switch. |
2. |
Install the crash pad lower panel. |
3. |
Connect the negative (-) battery terminal. |
Inspection |
1. |
Check for continuity between the terminals. If there is an abnormality, replace the switch.
|
Kia Niro (DE HEV) Owners Manual: Bluetooth® (BT) Audio
✽ NOTICE - Using Bluetooth® (BT) Audio
Bluetooth® Audio mode can only be used if a Bluetooth®-enabled phone
is connected. Only devices that support Bluetooth® audio can be used.
If the Bluetooth®-enabled phone is disconnected during play, the music
stops.
When the TRACK UP/DOWN ...
Kia Niro 2017 (DE HEV) Service Manual: Compressor Schematic diagrams
Schematic Diagrams
Connector Pin
Connector Pin Function
Connector
Pin No.
Function
A
1
12V Power Ground
2
Climate CAN Low
3
...