Kia Niro: Front Suspension System / Front Stabilizer Bar Components and components location
| Components |
|
1. Stabilizer bar |
2. Stabilizer link |
Front Lower Arm Repair procedures
Removal
1.
Remove the wheel and tire.
Tightening torque:
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)
...
Front Stabilizer Bar Repair procedures
Removal
1.
Disconnect the battery negative cable.
2.
Remove the universal bolt (A).
Tightening torque :
32.4 - 37.3 N· ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Blower Unit Components and components location
Component Location
1. Blower unit assembly
Components
1. Blower Intake Seal
2. Intake Duct Case [Upper]
3. Intake Door Assembly
4. Intake Duct Case [Lower]
5. Air Filter Cover
6. Intake Actuator
...
Kia Niro 2017 (DE HEV) Service Manual: Crankshaft Position Sensor (CKPS) Description and operation
Description
Crankshaft Position Sensor (CKPS) is one of the most important sensors of the
engine control system that detects the crankshaft position. Lack of CKPS signal
may cause the engine to stop.
This sensor is installed in ladder frame and generates alternating current by
m ...
