Kia Niro: Engine Control System / ETC (Electronic Throttle Control) System Schematic diagrams

Kia Niro 2017 (DE HEV) Service Manual / Engine Control/Fuel System / Engine Control System / ETC (Electronic Throttle Control) System Schematic diagrams

Circuit Diagram

Harness Connector

ETC (Electronic Throttle Control) System Description and operation
Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Unlike the existing mechanica ...

ETC (Electronic Throttle Control) System Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the KDS/GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output v ...

Other information:

Kia Niro (DE HEV) Owners Manual: Headlamp (High/Low beam) bulb replacement
1. Open the hood. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Disconnect the headlamp bulb socket-connector. 4. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the ...

Kia Niro 2017 (DE HEV) Service Manual: Side Sill Molding Repair procedures
Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pie ...

© 2016-2025 www.kniro.net