Kia Niro: Engine Control System / Electric EGR Control Valve Schematic diagrams

Circuit Diagram

Harness Connector

Electric EGR Control Valve Description and operation
Description The Electric EGR Control Valve is a solenoid valve installed between the EGR cooler and the exhaust line that controls the EGR (Exhaust Gas Recirculation) amount by the EC ...

Electric EGR Control Valve Repair procedures
Inspection [Motor] 1. Switch "OFF" the ignition. 2. Disconnect the EEGR valve connector. 3. Check if the EEGR ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Crankshaft Position Sensor (CKPS) Troubleshooting
Signal Waveform This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveforms at idle. The PCM controls the injection and ignition timing by using these signals. Generally, the CKPS signal is used to detect the piston position whe ...

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description BSD is a system that uses two magnetic wave radar sensors attached on the rear panel to measure the distance from the vehicle in the back and senses and sets off (visual and auditory) alarms for any vehicle coming into the blind spot. – Blind Spot ...

© 2016-2025 www.kniro.net