| Description |
Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring.
It protects the driver by deploying the airbag when frontal crash occurs. The SRSCM determines deployment of the Driver Airbag (DAB).
Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury. |
Airbag ModuleKia Niro 2017 (DE HEV) Service Manual: Description and operation
Description
–
AEB system is designed to help avoid a potential collision or reduce
its impact when drivers applies inadequate, delayed or no brakes at all
to avoid a collision.
–
The system detects the risk factors on the road by usin ...
Kia Niro 2017 (DE HEV) Service Manual: Muffler Repair procedures
Removal and Installation
Front Muffler
1.
Disconnect the heated oxygen sensor connector (A) and then remove it
from the bracket.
2.
Remove the under cover (A).
Tightening torque :
7.8 - 9.8 N·m (0.8 - 1.0 ...