Kia Niro: Exhaust Emission Control System / CVVT (Continuous Variable Valve Timing) System Schematic diagrams
| Circuit Diagram |
| Variable Force Solenoind (VFS) [Bank 1 / Intake] |
Harness Connector
| CVVT Oil Control Valve (OCV) [Bank 1 / Exhaust] |
Harness Connector
CVVT (Continuous Variable Valve Timing) System Description and operation
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve
timing of the intake and exhaust valve in accordance with the ECM control signal
which is calc ...
CVVT (Continuous Variable Valve Timing) System Repair procedures
Inspection
Variable Force Solenoind (VFS)
Refer to Engine Control / Fuel System - "Variable Force Solenoind (VFS)"
CVVT Oil Control Valve (OCV)
Refer ...
Other information:
Kia Niro (DE HEV) Owners Manual: Stop and tail lamp bulb replacement
1. Open the tailgate.
2. Open the service cover.
3. Loosen the light assembly retaining screws with a cross-tip screwdriver.
4. Remove the rear combination lamp assembly from the body of the vehicle.
5. Disconnect the rear combination lamp connector.
6. Remove the socket from the assembly ...
Kia Niro (DE HEV) Owners Manual: Closing the hood
1. Before closing the hood, check the following:
All filler caps in the engine compartment must be correctly installed.
Gloves, rags or any other combustible material must be removed from the
engine compartment.
2. Lower the hood halfway and push down to securely lock in place.
Then ...
