Kia Niro: Floor Console / Console Armrest Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the floor console assembly.

(Refer to Floor Console - "Floor Console Assembly")

2.

Remove the rear console cover.

(Refer to Floor Console - "Rear Console Cover")

3.

Loosen the mounting screws (A) and remove the console armrest (B).

4.

Install in the reverse order of removal.

  

Replace any damaged clips.

Console Armrest Components and components location
Component Location 1. Console armrest ...

Front Bumper
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Troubleshooting
Basic Troubleshooting Basic Troubleshooting Guide Customer Problem Analysis Sheet Basic Inspection Procedure Measuring Condition of Electronic Parts' Resistance The measured resistance at high temperature after vehicle running may be high or low. So all resistance ...

Kia Niro 2017 (DE HEV) Service Manual: Concentric Slave Cylinder Assembly Components and components location
Components 1. Clutch disc 2. Clutch cover 3. Concentric slave cylinder 4. Hybrid motor assembly 5. Engine clutch actuator 6. Reservoir ...

© 2016-2026 www.kniro.net