Peugeot 2008: In the event of a breakdown / Changing a fuse

Accessing the tools

The extraction tweezers are located behind the fusebox cover.

Depending on version:

Peugeot 2008. Changing a fuse

Peugeot 2008. Changing a fuse

Changing a fuse

Before changing a fuse:

To replace a fuse, it is essential to:

If the fault recurs soon after replacing a fuse, have the electrical system checked by a PEUGEOT dealer or a qualified workshop.

Peugeot 2008. Changing a fuse The fuse allocation tables and the corresponding diagrams are available from a PEUGEOT dealer or from a qualified workshop.

Peugeot 2008. Changing a fuse The replacement of a fuse not shown in the allocation tables may cause a serious malfunction of the vehicle. Contact a PEUGEOT dealer or a qualified workshop.

Peugeot 2008. Changing a fuse

Peugeot 2008. Changing a fuse Installing electrical accessories

The vehicle's electrical system is designed to operate with standard or optional equipment.

Before fitting other electrical equipment or accessories to your vehicle, contact a PEUGEOT dealer or a qualified workshop.

Peugeot 2008. Changing a fuse PEUGEOT accepts no responsibility for the cost incurred in repairing the vehicle or for rectifying malfunctions resulting from the installation of accessories not supplied or not recommended by PEUGEOT and not installed in accordance with its recommendations, in particular when the combined power consumption of all of the additional equipment connected exceeds 10 milliamperes.

Fuses in the dashboard

The fusebox is located in the lower dashboard (left-hand side).

To access the fuses, follow the same procedure as described for accessing the fuse replacement tools.

Fuse tables

Lower fusebox

Peugeot 2008. Changing a fuse

Peugeot 2008. Changing a fuse

Peugeot 2008. Changing a fuse

Upper fusebox

Peugeot 2008. Changing a fuse

Peugeot 2008. Changing a fuse

Engine compartment fuses

The fusebox is placed in the engine compartment near the battery.

Accessing the fuses

Peugeot 2008. Changing a fuse

Fuse table

Peugeot 2008. Changing a fuse

Peugeot 2008. Changing a fuse

Changing a bulb
In some weather conditions (e.g. low temperature or humidity), misting on the internal surface of the glass of the headlamps and rear lamps is normal, and will disappear after the lamps have been ...

12  V battery  / Accessory battery
Procedure for starting the engine using another battery or for charging a discharged battery. Lead-acid starter batteries These batteries contain harmful substances (sulphuric acid and lead). They ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Rear Door Window Glass Components and components location
Component Location 1. Rear door window glass ...

Kia Niro 2017 (DE HEV) Service Manual: Fuel Pressure Sensor (FPS) Description and operation
Description Installed on top of the low pressure fuel pump, the Fuel Pressure Sensor (FPS) measures the pressure in the low pressure fuel line. Based on the fuel pressure measured by the FPS and the amount of fuel consumed, the fuel pump control module (FPCM) determines whether to ...

© 2016-2022 www.kniro.net