Kia Niro: AHB(Active Hydraulic Boost) System / Brake Pedal Components and components location

Kia Niro 2017 (DE HEV) Service Manual / Brake System / AHB(Active Hydraulic Boost) System / Brake Pedal Components and components location

Components

1. Pedal stroke sensor
2. Stop lamp switch

3. Brake pedal arm


Brake Line Repair procedures
Removal 1. Disconnect the brake fluid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder ...

Brake Pedal Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Pre-Charge Resistor Description and operation
Description Built into the Power Relay Assembly (PRA), the Pre-Charge Resistor protects the high voltage circuit by limiting the current while the inverter capacitor is being charged. 1. High Voltage Power Terminal (-) 2. High Voltage Power Terminal (+) 3. ...

Kia Niro 2017 (DE HEV) Service Manual: Blower Motor Repair procedures
Inspection 1. Operate the heater controls at IGN2 to ensure that the motor is running. 1. Battery (+) 2. Input signal 3. ? 4. Ground 2. If the blower motor does ...

© 2016-2022 www.kniro.net