Kia Niro: Chassis / Brake/Clutch Fluid Repair procedures
| Inspection |
Check the brake fluid level in the brake fluid reservoir. The level should be between “MIN” and “MAX” marks on the side of the reservoir.
Use only hydraulic brake fluid conforming to DOT 3 or DOT 4 specification.
Check the brake system for any leakage if the fluid level is extremely low (lower than MIN).
Chassis
...
Brake Lines, Hoses and Connections Repair procedures
Inspection
Visually check for proper installation, chafing, cracks, deterioration and any
leakage.
Replace any deteriorated or damaged parts immediately. ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Fuel Pressure Sensor (FPS) Repair procedures
Inspection
1.
Connect the KDS/GDS on the Data Link Connector (DLC).
2.
Check that the output voltage is within the specification.
Pressure [kPa (kgf/cm², psi)]
Output Voltage (V) [Verf=5V]
...
Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Component Location
1. Low Voltage DC/DC Converter (LDC)
2. Power Outlet Terminal (DC 12V)
3. Ground Terminal
...
