Kia Niro: Driving your vehicle / Blind spot detection system
The Blind spot detection system uses a radar sensor to alert the driver while driving.
It senses the rear side territory of the vehicle and provides information to the driver.
➀ Blind spot detection
Warning range is dependent on your vehicle speed. However, if the speed of your vehicle is faster by 10km/h or more than other nearby vehicles, the warning is not operated.
➁ Lane change assist
When vehicles are approaching to your vehicle at high speed, the warning is operated.
➂ Rear cross traffic alert
When your vehicle moves backward, the sensor detects approaching vehicles to the left or right side direction and warning is operated.
WARNING
- Always check the road condition while driving for unexpected situations even though the Blind spot detection system is operating.
- Blind spot detection system is a system made for convenience. Do not solely rely on the system but always pay attention to drive safely.
Active LKA
LKAS operates for a vehicle to keep the region of lane center more efficiently.
The steering assistance is activated more frequently and earlier than standard
LKA.
LDW is generated when the ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Description and operation
System Configuration
PAS consists of 8 sensors (4 in the front and 4 in the rear) that are used to
detect obstacles and transmit the result in three separate warning levels, the first,
second and third to IPM (BCM) via LIN communication. IPM (BCM) decides the alarm
level by the tr ...
Kia Niro 2017 (DE HEV) Service Manual: Rear Bumper beam Assembly Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pie ...
