Kia Niro: Driveshaft Assembly / BJ Boot Components and components location

Kia Niro 2017 (DE HEV) Service Manual / Driveshaft and axle / Driveshaft Assembly / BJ Boot Components and components location

Components

1. BJ assembly
2. BJ circlip
3. BJ boot band
4. BJ boot

5. Dynamic damper band
6. Dynamic damper
7. Shaft
8. TJ boot band

9. TJ boot
10. Spider assembly
11. Snap ring
12. TJ housing

13. TJ circlip

Dynamic Damper Repair procedures

Replacement 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refe ...

BJ Boot Repair procedures

Replacement 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refe ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description of ESP Electronic Stability Program (ESP) recognizes critical driving conditions, such as panic reactions in dangerous situations, and stabilizes the vehicle by wheel-individual braking and engine control intervention. ESP adds a further function known as Active Yaw ...

Kia Niro (DE HEV) Owners Manual: Prerequisite for activation
The AEB gets ready to be activated, when the AEB is selected on the LCD display, and when the following prerequisites are satisfied. - The ESC is activated. - The driving speed is over 10km/h. (However, AEB is activated within certain driving speed.) - When recognizing the vehicle or the pede ...