Kia Niro: Air Conditioning System / Auto Defogging Sensor Description and operation
| Description |
Installed on the windshield glass, the auto defogging sensor detects humidity to blow out wind for defogging to improve visibility and driver comfort. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator, blower motor rpm, and mode actuator.
Ambient Temperature Sensor Repair procedures
Inspection
1.
Check the resistance of the ambient temperature sensor between terminals
1 and 2 whether it changes by changing the ambient temperature.
...
Auto Defogging Sensor Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the auto defogging sensor cover (A).
3.
U ...
Other information:
Kia Niro (DE HEV) Owners Manual: Fuel Gauge
■ Type A
■ Type B
This gauge indicates the approximate amount of fuel remaining in the fuel tank.
✽ NOTICE
The fuel tank capacity is given in chapter 9.
The fuel gauge is supplemented by a low fuel warning light, which will
illuminate when the fuel tank is nearly empty.
On in ...
Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH).
When a vehicle crashes with a certain degree of frontal impact, the pretensioner
seat belt helps to reduce the severity of injury to the front seat occupants by
retracting the seat belt ...
