Peugeot 2008: Driving / Active Blind Spot Monitoring System

Peugeot 2008 2019-2023 Owner's Manual / Driving / Active Blind Spot Monitoring System

Refer to the General recommendations on the use of driving and manoeuvring aids.

Peugeot 2008. Active Blind Spot Monitoring System

This system includes sensors, placed on the sides of the bumpers, and warns the driver of the potentially dangerous presence of another vehicle (car, truck, motorcycle) in the blind spot areas of their vehicle (areas hidden  from  the driver's field of vision).

Peugeot 2008. Active Blind Spot Monitoring System

The warning is given by a fixed warning lamp that appears in the door mirror on the side in question:

In addition to this alert, a correction of trajectory will be felt if you attempt to cross a line with the direction indicator activated, to help you avoid a collision.

Activation / Deactivation

Peugeot 2008. Active Blind Spot Monitoring System It is set via the Driving  / Vehicle touch screen menu.

When starting the vehicle, the warning lamp comes on in each mirror to indicate that the system is activated.

The state of the system stays in the memory when switching off the ignition.

Peugeot 2008. Active Blind Spot Monitoring System The system is automatically deactivated when towing with a towing device approved by PEUGEOT.

Conditions for operation

Operating limits

Peugeot 2008. Active Blind Spot Monitoring System

No alert will be given and no correction will be made in the following situations:

Malfunction

Peugeot 2008. Active Blind Spot Monitoring System If the event of a malfunction, this warning lamp comes on in the instrument panel, accompanied by the display of a message.

Contact a PEUGEOT dealer or a qualified workshop to have the system checked.

Peugeot 2008. Active Blind Spot Monitoring System The system may suffer temporary interference in certain weather conditions (rain, hail, etc.).

In particular, driving on a wet surface or moving from a dry area to a wet area can cause false alerts (for example, the presence of a fog of water droplets in the blind spot angle is interpreted as a vehicle).

In bad or wintry weather, ensure that the sensors are not covered by mud, ice or snow.

Take care not to cover the warning zone in the door mirrors, or the detection zones on the front and rear bumpers with adhesive labels or other objects; they may hamper correct operation of the system.

Active Lane Keeping Assistance
Refer to the General recommendations on the use of driving and manoeuvring aids. Using a camera located at the top of the windscreen to identify lane markings on the road and at the edges of the roa ...

Active Safety Brake with Distance Alert and Intelligent emergency braking assistance
Refer to the General recommendations on the use of driving and manoeuvring aids. This system: warns the driver that their vehicle is at risk of collision with the vehicle in front, a pedestrian ...

Other information:

Kia Niro (DE HEV) Owners Manual: Automatic climate control system
To defog inside windshield 1. Set the fan speed to the desired position. 2. Select desired temperature. 3. Press the defroster button (). 4. The air conditioning will turn on according to the detected ambient temperature and outside (fresh) air position will be selected automatically. If th ...

Kia Niro 2017 (DE HEV) Service Manual: Engine Mounting Repair procedures
Removal and Installation Engine Mounting Bracket 1. Remove the engine room under cover. (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover") 2. Install the jack to the edge of upper oil pan to support the engine. ...

© 2016-2023 www.kniro.net