Kia Niro: Engine Control System / Variable Force Solenoid (VFS) Schematic diagrams

Kia Niro 2017 (DE HEV) Service Manual / Engine Control/Fuel System / Engine Control System / Variable Force Solenoid (VFS) Schematic diagrams

Circuit Diagram

Harness Connector

Variable Force Solenoid (VFS) Description and operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calc ...

Variable Force Solenoid (VFS) Repair procedures
Removal 1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal. 2. Disconnect the VFS connector (A). ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Inspection Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cover the forward facing sensor. 3. Head a light to the rearward-faci ...

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description BSD is a system that uses two magnetic wave radar sensors attached on the rear panel to measure the distance from the vehicle in the back and senses and sets off (visual and auditory) alarms for any vehicle coming into the blind spot. – Blind Spot ...

© 2016-2019 www.kniro.net