Kia Niro: Light bulbs / Vanity mirror lamp bulb replacement

Kia Niro (DE HEV) Owners Manual / Maintenance / Light bulbs / Vanity mirror lamp bulb replacement

WARNING

Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock.

1. Using a flat-blade screwdriver, gently pry the lamp assembly from interior.

2. Remove the bulb by pulling it straight out.

3. Install a new bulb in the socket.

4. Install the lamp assembly to interior.

CAUTION

Be careful not to dirty or damage the lens, lens tab, and plastic housings.

Map lamp bulb replacement
If the map lamp (bulb and LED type) does not operate, we recommend that you checked an authorized Kia dealer. ...

Room lamp bulb replacement
WARNING Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock. 1. Using a flat-blade screwdriver, gen ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Safety Plug Description and operation
Description Safety Plug is installed on the rear side of the high voltage battery and it can mechanically shut the high voltage circuit off when servicing the high voltage system (i.e. High Voltage Battery, Power Relay Assembly, HPCU, BMS ECU, Hybrid Drive Motor, Inverter, HSG, LD ...

Kia Niro 2017 (DE HEV) Service Manual: Motor Temperature Sensor Repair procedures
Inspection Hybrid Drive Motor 1. Inspect the temperature sensor resistance. Item Pin Specification Remarks Resistance (temperature sensor) ...

© 2016-2018 www.kniro.net