Kia Niro: Heater / Temperature Control Actuator Description and operation

Kia Niro 2017 (DE HEV) Service Manual / Heating, Ventilation and Air Conditioning / Heater / Temperature Control Actuator Description and operation

Description

Located in the heater unit, the temperature control actuator regulates the temperature in the following procedure.

The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temperature door.

Temperature Control Actuator Components and components location
Components Location 1. Temperature control actuator [LH] 2. Temperature control actuator [RH] ...

Temperature Control Actuator Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the temperature control actuator connector. 3. Verify t ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Intake Air Temperature Sensor (IATS) Description and operation
Description Mounted inside the Manifold Absolute Pressure Sensor, Intake Air Temperature Sensor (IATS) detects the intake air temperature. To precisely calculate the amount of air, correction of the air temperature is required as the air density varies with the temperature. So the ...

Kia Niro 2017 (DE HEV) Service Manual: Mass Air Flow Sensor (MAFS) Description and operation
Description MAFS uses a sensing element made of a hot-film to measure the mass of intake air entering the engine and to send the signal to the ECM. A large amount of intake air represents acceleration or high load conditions while a small amount of intake air represents decelerati ...

© 2016-2019 www.kniro.net