Kia Niro: Tailgate / Tailgate Latch Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the tailgate trim.

(Refer to Tailgate - " Tailgate Trim")

2.

Disconnect the tailgate latch connector (A).

3.

Remove the tailgate latch assembly (B) after loosening the mounting bolts (A).

Tightening torque :

10.8 - 11.8 N·m (1.1 - 1.2 kgf·m, 8.0 - 8.7 lb·ft)

4.

Install in the reverse order of removal.

  

Make sure that the tailgate locks/unlocks and opens/closes properly.

Adjust the tailgate alignment.

Make sure the connectors are connected in properly.

Tailgate Latch Components and components location
Component Location 1. Tailgate latch assembly ...

Tailgate Lift Repair procedures
Replacement    Be careful as the tailgate may fall down on people when the lifts are removed. Have a helper hold the ...

Other information:

Kia Niro (DE HEV) Owners Manual: Air bag inflation conditions
Front air bags Front air bags are designed to inflate in a frontal collision depending on the severity of impact of the front collision. Side and curtain air bags Side and curtain air bags are designed to inflate when an impact is detected by side collision sensors depending on the severity o ...

Kia Niro 2017 (DE HEV) Service Manual: Inspection mode procedures
Procedure for entering engine forced activation mode If the engine needs to be running constantly while the vehicle is stopped to inspect emission gas or perform maintenance on the vehicle, follow below procedure to enter engine forced activation mode. 1. Place ...

© 2016-2019 www.kniro.net