Kia Niro: ISOFIX anchorage and toptether anchorage (ISOFIX anchorage system) for children / Suitability of each seating position for ISOFIX Child Restraint Systems according to ECE regulations
IUF = Sutiable for ISOFIX Forward-Facing Child Restraint Systems of universal
category approved for use in the mass group.
IL = Suitable for particular ISOFIX Child Restraint Systems given in the attached
list. These ISOFIX CRS are those of the "specific vehicle", "restricted" or "semi-universal"
categories.
X = ISOFIX position not suitable for ISOFIX Child Restraint System in this mass
group and/or this size class.
A - ISO/F3 : Full-Height forward-facing toddler Child Restraint System (height 720mm)
B - ISO/F2 : Reduced-height forward-facing toddler Child Restraint System (height
650mm)
B1 - ISO/F2X : Reduced-height second version back surface shape forward- facing
toddler Child Restraint System (height 650mm)
C - ISO/R3 : Full-size rearward-facing toddler Child Restraint System
D - ISO/R2 : Reduced-size rearward-facing toddler Child Restraint System
E - ISO/R1 : Infant-size rearward-facing Child Restraint System
F - ISO/L1 : Left lateral facing position Child Restraint System (carry-cot)
G - ISO/L2 : Right lateral facing position Child Restraint System (carry-cot)
Securing a Child Restraint System seat with “Top-tether Anchorage” system
Child restraint system top tether anchorages are located on the back of the rear
seatbacks.
1. Route the Child Restraint System top-tether strap over the seatback. Placing
the top tether stra ...
Securing a Child Restraint System with a lap/shoulder belt
When not using the ISOFIX system, all Child Restraint Systems must be secured
to a rear seat with the lap part of a lap/shoulder belt.
Installing a Child Restraint System with a lap/shoulder belt
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Fuel Pump Repair procedures
Inspection
[Fuel sender]
1.
Turn the ignition switch OFF, and then remove battery (-) terminal.
2.
Remove the fuel pump assembly.
3.
Using an ohmmeter, measure the resistance between terminals 1 and 6 of
sender c ...
Kia Niro (DE HEV) Owners Manual: Inverter coolant
Check the condition and connections of all cooling system hoses and heater hoses.
Replace any swollen or deteriorated hoses.
The coolant level should be filled between MAX and MIN marks on the side of the
coolant reservoir when the engine is cool.
If the coolant level is low, add enough spec ...
