Kia Niro: Audio system / Steering wheel audio controls

Kia Niro (DE HEV) Owners Manual / Audio system / Audio system / Steering wheel audio controls

The steering wheel may incorporate audio control buttons.

CAUTION

Do not operate audio remote control buttons simultaneously.

VOLUME (+/- ) (1)

SEEK/PRESET (/) (2)

The SEEK/PRESET lever has different functions based on the system mode. For the following functions the lever should be pressed for 0.8 seconds or more.

RADIO mode

It will function as the AUTO SEEK select button.

USB/ iPod® mode

It will function as the FF/REW button. If the SEEK/PRESET button is pressed for less than 0.8 seconds, it will work as follows in each mode.

RADIO mode

It will function as the PRESET STATION buttons.

USB/ iPod® mode

It will function as TRACK UP/DOWN button.

MODE () (3)

Press the button to change audio source.

FM ➟ AM ➟ DAB* ➟ USB ➟ iPod® ➟ BT Audio ➟ AUX ➟ MY MUSIC

MUTE () (4)

Detailed information for audio control buttons are described in the following pages in this section.

Shark fin antenna
The shark fin antenna will receive the transmit data. CAUTION - Pole type antenna Before entering a place with a low height clearance or a car wash, remove the antenna pole by rotating it coun ...

AUX, USB port
You can use the AUX port to connect audio devices and the USB port to plug in a USB device or iPod®. ✽ NOTICE When using a portable audio device connected to the power outlet, noise may occ ...

Other information:

Kia Niro (DE HEV) Owners Manual: Transmitter precautions
The transmitter will not work if any of the following occurs: The ignition key is in the ignition switch. (for folding key) Another vehicle’s smart key is being operated close to your vehicle. You exceed the operating distance limit (about 10 m [30 feet]). The battery in the transmitter ...

Kia Niro 2017 (DE HEV) Service Manual: Main Relay (+) / (-) Description and operation
Description Main Relay is divided into the positive (+) relay and negative (-) relay. It is integrated into the Power Relay Assembly (PRA) and connects the power supply line and ground line between the high voltage battery and the inverter in accordance with the BMS ECU control si ...

© 2016-2021 www.kniro.net