Kia Niro: Engine start/stop button position / START/RUN

Not illuminated

To start the engine, depress the brake pedal and press the engine start/stop button with the shift lever in the P (Park) or the N (Neutral) position. For your safety, start the engine with the shift lever in the P (Park) position.

✽ NOTICE

If you press the engine start/stop button without depressing the brake pedal for dual clutch transaxle vehicles, the engine will not start and the engine start/stop button changes as follow:

OFF ➔ACC ➔ ON ➔ OFF or ACC

✽ NOTICE

If you leave the engine start/stop button in the ACC or ON position for a long time, the battery will discharge.

WARNING

ON
Redish orange Press the engine start/stop button while it is in the ACC position without depressing the brake pedal. The warning lights can be checked before the engine is started. Do not leave ...

Starting the hybrid system
WARNING Always wear appropriate shoes when operating your vehicle. Unsuitable shoes, such as high heels, ski boots, sandals, flip-flops, etc., may interfere with your ability to use the brak ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Seat Heater Switch Repair procedures
Removal [Front Seat] 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console assembly. (Refer to Body - "Floor Console Assembly") 3. Disconnect the front seat heater switch connector ( ...

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Teaching Procedures 1. Key Teaching Procedure Key teaching must be done after replacing a defective PCM(ECM) or when providing additional keys to the vehicle owner. The procedure starts with an PCM(ECM) request for vehicle specific data (PIN code: 6dig ...

© 2016-2020 www.kniro.net