Peugeot 2008: Driving / Speed limiter

Refer to the General recommendations on the use of driving and manoeuvring aids.

Peugeot 2008. Speed limiter This system prevents the vehicle from exceeding the speed programmed by the driver (speed setting).

The speed limiter is switched on manually.

The minimum speed setting is 19 mph (30  km/h).

The speed setting remains in the system memory when the ignition is switched off.

Steering-mounted control

Peugeot 2008. Speed limiter

  1. ON (LIMIT position) / OFF
  2. Reduce the speed setting
  3. Increase the speed setting
  4. Pause / resume speed limiter with the speed setting previously stored
  5. Use the speed suggested by the Speed Limit Recognition and Recommendation (MEM display)

For more information on the Speed Limit Recognition and Recommendation, refer to the corresponding section.

Information displayed on the instrument panel

Peugeot 2008. Speed limiter

  1. Speed limiter on/pause
  2. Speed limiter mode selected
  3. Programmed speed value
  4. Speed suggested by the Speed Limit recognition and recommendation system (depending on version)

Switching on/pausing

Peugeot 2008. Speed limiter An audible warning will sound if the vehicle's speed exceeds the speed setting for an extended period.

Adjusting the limit speed setting

You do not have to switch the speed limiter on in order to set the speed.

To modify the limit speed setting based on the vehicle’s current speed:

To modify the cruise speed setting based on the speed suggested by the Speed Limit Recognition and Recommendation, as shown on the instrument panel:

The speed is immediately shown on the instrument panel as the new speed setting.

Temporarily exceeding the speed setting

Peugeot 2008. Speed limiter

The speed limiter is deactivated temporarily and the displayed speed setting flashes.

When the limit speed is exceeded but this is not due to action by the driver (in case of a steep slope, for example), an audible signal triggers immediately.

Peugeot 2008. Speed limiter On a steep descent or in the event of sharp acceleration, the speed limiter will not be able to prevent the vehicle from exceeding the speed setting.

Brake if necessary to control the speed of your vehicle.

Peugeot 2008. Speed limiter

Once the speed of the vehicle returns to the programmed setting, the speed limiter functions again: the display of the speed setting becomes fixed again.

Switching off

Malfunction

Peugeot 2008. Speed limiter

Dashes are displayed (flashing, initially, then fixed) in the event of a speed limiter malfunction.

Have the system checked by a PEUGEOT dealer or a qualified workshop.

Speed Limit Recognition and Recommendation
Refer to the General recommendations on the use of driving and manoeuvring aids. This system displays the maximum authorised speed in the instrument panel, according to the speed limits in the coun ...

Cruise control - particular recommendations
For the safety of everyone, only use the cruise control where the driving conditions allow running at a constant speed and keeping an adequate safety distance. Remain vigilant when the cruise contr ...

Other information:

Kia Niro (DE HEV) Owners Manual: Storing positions into memory using the buttons on the door
Storing driver’s seat positions 1. Shift the shift lever into P while the engine start/stop button is ON or ignition switch ON. 2. Adjust the driver’s seat and outside rearview mirror comfortable for the driver. 3. Press SET button on the control panel. The system will beep once. 4. Press ...

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Drive Motor Assembly Components and components location
Components 1. Dual clutch transmission assembly (DCT) 2. Hybrid drive motor assembly 3. Concentric slave cylinder 4. Engine clutch actuactor assembly ...

© 2016-2021 www.kniro.net