Toyota Corolla: Dynamic radar cruise control / Setting the vehicle speed (vehicle-to-vehicle distance control mode)

Toyota Corolla 2019-2022 Owners Manual / Driving / Using the driving support systems / Dynamic radar cruise control / Setting the vehicle speed (vehicle-to-vehicle distance control mode)

1 Press the cruise control main switch to activate the cruise control.

Dynamic radar cruise control indicator will come on and a message will be displayed on the multi-information display. Press the switch again to deactivate the cruise control.

If the cruise control main switch is pressed and held for 1.5 seconds or more, the system turns on in constant speed control mode.

Toyota Corolla. Setting the vehicle speed (vehicle-to-vehicle distance control mode)

2 Accelerate or decelerate, with accelerator pedal operation, to the desired vehicle speed (at or above approximately 20 mph [30 km/h]) and press the “-SET” switch to set the speed.

Cruise control “SET” indicator will come on.

The vehicle speed at the moment the switch is released becomes the set speed.

Toyota Corolla. Setting the vehicle speed (vehicle-to-vehicle distance control mode)

Driving in vehicle-to-vehicle distance control mode
This mode employs a radar to detect the presence of vehicles up to approximately 328 ft. (100 m) ahead, determines the current vehicle- to-vehicle following distance, and operates to maintain a suit ...

Adjusting the set speed
To change the set speed, press the “+RES” or “-SET” switch until the desired set speed is displayed. 1 Increases the speed 2 Decreases the speed Fine adjustment: Press the switch. Large adju ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Thermostat Repair procedures
Removal and Installation    Disassembly of the thermostat may have an adverse effect, causing deteriorated cooling efficiency. Do not remove the thermostat, even if the engine tends to overheat. ...

Kia Niro (DE HEV) Owners Manual: Malfunction indicator
The VSM can be deactivated even if you don’t cancel the VSM operation by pressing the ESC OFF button. It indicates that a malfunction has been detected somewhere in the EPS (Electronic Power Steering) system or VSM system. If the ESC indicator light () or EPS warning light remains on, we r ...

© 2016-2022 www.kniro.net