Kia Niro: ISOFIX anchorage and toptether anchorage (ISOFIX anchorage system) for children / Securing a Child Restraint System seat with “Top-tether Anchorage” system
Child restraint system top tether anchorages are located on the back of the rear seatbacks.
1. Route the Child Restraint System top-tether strap over the seatback. Placing the top tether strap, please follow the instructions of the Child Restraint System manufacturer.
2. Connect the top-tether strap to the top-tether anchorage, then tighten the top-tether strap according to the instructions of your Child Restraint System's manufacturer to firmly attach the Child Restraint System to the seat.
WARNING
Take the following precautions when installing the top-tether:
- Read and follow all installation instructions provided with your Child Restraint System.
- NEVER attach more than one Child Restraint System to a single ISOFIX top-tether anchorage. This could cause the anchorage or attachment to come loose or break.
- Do not attach the top-tether to anything other than the correct top-tether anchorage. It may not work properly if attached to something else.
- Child Restraint System anchorages are designed to withstand only those loads imposed by correctly fitted Child Restraint System.
Under no circumstances are they to be used for adult seat belts or harnesses or for attaching other items or equipment to the vehicle.
Securing a Child Restraint System with the “ISOFIX Anchorage System”
To install an i-Size or ISOFIX-compatible Child Restraint System in either of
the rear outboard seating positions:
1. Move the seat belt buckle away from the ISOFIX anchorages.
2. Move any other o ...
Suitability of each seating position for ISOFIX Child Restraint Systems according
to ECE regulations
IUF = Sutiable for ISOFIX Forward-Facing Child Restraint Systems of universal
category approved for use in the mass group.
IL = Suitable for particular ISOFIX Child Restraint Systems given in the ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Safety Plug Description and operation
Description
Safety Plug is installed on the rear side of the high voltage battery and it
can mechanically shut the high voltage circuit off when servicing the high voltage
system (i.e. High Voltage Battery, Power Relay Assembly, HPCU, BMS ECU, Hybrid Drive
Motor, Inverter, HSG, LD ...
Kia Niro (DE HEV) Owners Manual: Tires
Adjust the tire inflation pressures to specification. Low tire inflation pressures
will result in overheating and possible failure of the tires.
Avoid using worn or damaged tires which may result in reduced traction or tire
failure.
✽ NOTICE
Never exceed the maximum tire inflation pressure ...