Kia Niro: Seat Electrical / Seat Heater Switch Repair procedures

Removal

[Front Seat]

1.

Disconnect the negative (-) battery terminal.

2.

Remove the floor console assembly.

(Refer to Body - "Floor Console Assembly")

3.

Disconnect the front seat heater switch connector (A).

4.

Remove the front seat heater switch (A) after loosening the mounting screws.

[Rear Seat]

1.

Disconnect the negative (-) battery terminal.

2.

Remove the rear door power window switch.

(Refer to Power Windows - "Power Window Switch")

Installation

[Front Seat]

1.

Install the front seat heater switch.

2.

Connect the front seat heater switch connector.

3.

Install the floor console assembly.

4.

Connect the negative (-) battery terminal.

[Rear Seat]

1.

Install the rear door power window switch.

2.

Connect the negative (-) battery terminal.

Seat Heater Switch Schematic diagrams
Circuit Diagram Front Seat Heater Switch Rear Seat Heater Switch ...

Air Ventilation Seat Components and components location
Component Location 1. Ventilation seat blower 2. Ventilation seat unit (Assist seat only) ...

Other information:

Kia Niro (DE HEV) Owners Manual: Suitability of each seating position for ISOFIX Child Restraint Systems according to ECE regulations
IUF = Sutiable for ISOFIX Forward-Facing Child Restraint Systems of universal category approved for use in the mass group. IL = Suitable for particular ISOFIX Child Restraint Systems given in the attached list. These ISOFIX CRS are those of the "specific vehicle", "restricted&q ...

Kia Niro (DE HEV) Owners Manual: Larger children
Children who are too large for child restraint systems should always occupy the rear seat and use the available lap/shoulder belts. The lap portion should be fastened and snugged on the hips and as low as possible. Check if the belt fits periodically. A child's squirming could put the belt ...

© 2016-2019 www.kniro.net