Kia Niro: SRSCM / Seat Belt Buckle Switch (BS) Description and operation

Kia Niro 2017 (DE HEV) Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS) Description and operation

Description

The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return. The buckle status shall modify the SRSCM deployment. If the buckle status is unbuckled, the corresponding pretensioner will not be deactivated.

Side Impact Sensor (SIS) Repair procedures
Removal Pressure side impact sensor (P-SIS) 1. Disconnect the battery negative terminal, and wait for at least thirty seconds before beginning work. ...

Seat Belt Buckle Switch (BS) Components and components location
Components ...

Other information:

Kia Niro (DE HEV) Owners Manual: Interior general precautions
Prevent chemicals such as perfume, cosmetic oil, sun cream, hand cleaner, and air freshener from contacting the interior parts because they may cause damage or discoloration. If they do contact the interior parts, wipe them off immediately. If necessary, use a vinyle cleaner, see instructions ...

Kia Niro 2017 (DE HEV) Service Manual: Troubleshooting
Trouble Shooting Ignition System Symptom Suspect area Remedy Vehicle indicates Ready in dash, but engine will not run when requested by the HPCU (HEV module). Ignition coil Inspect ignition coil, or repl ...

© 2016-2019 www.kniro.net