Kia Niro: Assist Emergency Braking(AEB) System / Schematic diagrams

Schematic diagram

Terminal Function

NO.
Terminal function
1
B+
2
NC
3
NC
4
GND
5
NC
6
NC
7
C-CAN_LO
8
C-CAN_HI
9
L-CAN_LO
10
IGN1
11
NC
12
NC
13
NC
14
NC
15
NC
16
NC
17
NC
18
L-CAN_HI

Description and operation
Description – AEB system is designed to help avoid a potential collision or reduce its impact when drivers applies inadequate, delayed or no brakes at all to avoi ...

Repair procedures
Inspection AEB function ON / OFF switch was included to USM (User Setting Menu) and the state of the factory is ON. When the IGN On, maintain ON condition by default. And does not ref ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: DCT Control Module (TCM) Repair procedures
Inspection 1. TCM ground circuit test : Measure the resistance between TCM and chassis ground. (Inspect the terminal connected to the chassis ground with the back of harness connector as the inspection point of TCM side.) Specification : Below ...

Kia Niro 2017 (DE HEV) Service Manual: Passenger Airbag (PAB) Module Repair procedures
Removal 1. Disconnect the battery negative terminal, and wait for at least three minutes before beginning to work. 2. Remove the glove box assembly. (Refer to Body (Interior and Exterior) - "Glove box housing") ...

© 2016-2024 www.kniro.net