Kia Niro: Body Side Molding / Roof Rack Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the roof rack front cover and rear cover (A).

2.

Remove the roof rack cap (A).

3.

Remove the roof rack assembly (A) after loosening the nuts.

Tightening torque :

3.9 - 4.4 N·m (0.4 - 0.45 kgf·m, 2.9 - 3.3 lb·ft)

4.

Install in the reverse order of removal.

  

Replace any damaged clips..

Body Side Molding
...

Rear Spoiler Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: BMS ECU Schematic diagrams
BMS ECU Terminal And Input/Output Signal Connector [B01-VC] (24pin) : High Voltage Battery Cell Voltage Check Connector Pin No. Description Connected to 1 - - 2 ...

Kia Niro (DE HEV) Owners Manual: Electronic Stability Control (ESC) Indicator Light
This indicator light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When there is a malfunction with the ESC system. In this case, we recommend that you have the vehicle inspect ...

© 2016-2020 www.kniro.net