Kia Niro: Hybrid Motor Control System / Resolver Sensor Description and operation

Description

The accurate position of the rotor must be known at all times to ensure maximum output control of the motor.

Motor Control Unit (MCU) Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” ...

Resolver Sensor Schematic diagrams
Part Circuit Diagram [Hybrid Drive Motor] [HSG] ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Engine Room Under Cover Repair procedures
Removal Engine room under cover. 1. Remove the engine room under cover (A). Tightening torque : 3.9 - 5.9 N·m (0.4 - 0.6 kgf·m, 2.9 - 4.3 lb·ft) 2. Install in the reverse order of removal. ...

Kia Niro (DE HEV) Owners Manual: Headlamp (High/Low beam) bulb replacement
1. Open the hood. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Disconnect the headlamp bulb socket-connector. 4. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the ...

© 2016-2019 www.kniro.net