Kia Niro: Quarter Fixed Glass / Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

1.

Remove the rear pillar trim.

(Refer to Interior Trim - "Rear Pillar Trim")

2.

Loosen the quarter fixed glass (A) mounting nuts.

Tightening torque :

3.9 - 4.4 N·m (0.4 - 0.45 kgf·m, 2.9 - 3.3 lb·ft)

  

Tighten mounting nuts in the order of ? > ? > ? > ?.

3.

Remove the quarter fixed glass (A).

4.

Install in the reverse order of removal.

  

Replace any damaged clips.

Components and components location
Component Location 1. Quarter fixed glass ...

Rear Bumper
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the specific ...

Kia Niro 2017 (DE HEV) Service Manual: General information
Basic Service Symbols There are five primary symbols used to complement illustrations. These symbols indicate the part to apply such materials during service. Symbol Meaning Do not reuse the part. Replace a new one. ...

© 2016-2024 www.kniro.net