Adjustment |
1. |
After loosening the hinge (A) mounting bolts, adjust the hood (B) by moving it up and down, or right and left. |
2. |
Adjust the hood height by turning the hood overslam bumpers (C). |
3. |
After loosening the hood latch (D) mounting bolts, adjust the latch by moving it up and down, or right and left.
|
Kia Niro 2017 (DE HEV) Service Manual: Receiver-Drier Repair procedures
Replacement
1.
Remove the condenser.
2.
Remove the cap (B) on the bottom of the condenser with an L wrench (A).
Tightening torque :
9.81 - 14.71 N·m (1.0 - 1.5 kgf·m, 7.2 - 10.8 lb·ft)
...
Kia Niro 2017 (DE HEV) Service Manual: Condenser Repair procedures
Inspection
1.
Check the condenser fins for clogging and damage. Clean and blow compressed
air on any clogged fins. Unfold any bent fins with a screwdriver or pliers.
2.
Check the condenser connections for leakage, and repair or replace it, ...