Kia Niro: Cowl Top Cover / Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the cap (A) and the nuts (B), and then remove the wiper arm (C).

Tightening torque :

22.6 - 26.5 N·m(2.3 - 2.7 kgf·m, 16.6 - 19.5 lb·ft)

2.

Disconnect the nozzle hose (A).

3.

Detach the clips, then remove the cowl top cover (A).

4.

Install in the reverse order of removal.

  

Replace any damaged clips.

Components and components location
Component Location 1. Cowl top cover ...

Crash Pad
...

Other information:

Kia Niro (DE HEV) Owners Manual: Headlamp aiming
1. Inflate the tires to the specified pressure and remove any loads from the vehicle except the driver, spare tire, and tools. 2. The vehicle should be placed on a flat floor. 3. Draw vertical lines (Vertical lines passing through respective head lamp centers) and a horizontal line (Horizont ...

Kia Niro 2017 (DE HEV) Service Manual: Injector Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminals 1 and 2. 4. Check that the resistance is within the ...

© 2016-2020 www.kniro.net